RCP23 Plug-in socket receiver, pulse output
The RCP23 plug-in socket receiver receives transmission codes from up to 200 programmed secwave radio transmitters and triggers an 1-second
pulse on the connected device via the pulse output. The pulse can also be triggered via a button on the RCP23.
With the RCP23, it is therefore very easy to safely retrofit or convert garage door motors with a radio interface.
The RCP23 also comes with a power outlet which is not switched and thus remains fully usable.
With the RCP23, it is therefore very easy to safely retrofit or convert garage door motors with a radio interface.
The RCP23 also comes with a power outlet which is not switched and thus remains fully usable.
RCP23S5001A01
Technical specifications
| Coding | secwave, AES 128-bit encryption Up to 200 transmitters can be programmed. Not compatible with Easywave products! |
| Frequency | 868,30 MHz |
| Channels | 1 |
| Power supply | 230 V AC, 50 Hz |
| Power consumption | 0.4 W standby |
| Operating mode | PULSE (1 second) |
| Outputs | 1 potential-free relay contact (normally open) |
| Maximum contact load | pulse output: 1 A / 24 V DC mains voltage (not switchable): 16 A / 230 V AC |
| Operating temperature | -10 °C to +35 °C |
| Dimensions | 71,4 x 71,4 x 75,5 mm |
| Color | white similar to RAL 9003 |
Plug system
Scope of delivery
- Plug-in socket receiver pulse output
- Cable (length 150cm)
- Operating manual
Models
| Product numbers | Description |
|---|---|
| RCP23S5001A01 | Plug-in socket receiver, secwave, 230V, 1x pulse output, potential-free, D/A/NL/S/N, white |
Wiring diagram
