Homepage
The SM01 is a wireless and wired motion detector for automatic lighting control based on movement and brightness. It is suitable for wall mounting outdoors.

If a movement is detected while the measured brightness is below the set threshold value, the non-floating 230V relay output of the motion detector switches ON for the set time.

In addition, a radio telegram (Easywave code A) is sent, which can be taught into Easywave receivers. After the set time has elapsed, the relay output of the motion detector switches OFF and Easywave code B is transmitted.

SM01E5001A01-01K
Technical specifications
Coding factory coding with EasywaveSensor telegram
Frequency 868,30 MHz
Channels 1
Range typically 150 m in good free-field conditions
Power supply 230 V AC, 50 Hz
Power consumption 0.8 W standby
Detection angle 180°
Detection area crosswise max. 12 m, frontal max. 5 m
Brightness setting range 5 to 1000 lux
Switching period range 1 s to 20 min
Function detection of movement / transmitting by radio
switching ON/OFF (2-button operation)
Output 1 relay contact (normally open)
Maximum contact load LED lamps:
<2W = 25W; 2-8W = 90W; >8W = 100W

Incandescent and halogen lamp load:
2300 W

Low-voltage halogen lamps:
2300 VA

Fluorescent lamps (low-loss series devices):
400 VA

Fluorescent lamps (electronic series devices):
600 VA

Compact fluorescent lamps (electronic series devices):
150 W

Degree of Protection IP55
Operating temperature -25 °C to +45 °C
Dimensions 127 x 85 x 100 mm
Weight 220 g
Color white similar to RAL 9003
Scope of delivery
  • Motion detector
  • Mounting material
  • Operating manual
Models
Product numbers Description
SM01E5001A01-01K Motion detector outdoor, Easywave, 1x ON/OFF, 230V, 1x normally open, potential-loaded, IP55, white
Wiring diagram: Detection range: