Homepage TÜV - Certificate
This version of the RCJ01 is designed to control tubular motors directly. The receiver can be controlled by almost any Easywave transmitter in the UP/DOWN or DEADMAN operating modes. In the DEADMAN operatingmode, it is possible to adjust the slats of blinds.

In order to avoid overloading the roller shutter motor, this RCJ01 is equipped with an automatic switch-off mechanism.

Up to 32 transmitters can be programmed into the receiver's memory, ensuring that complex control tasks can be solved easily without taking up unnecessary space. The programming is very simple and is carried out by pressing a button directly on the device.

RCJ01E5002-04-23K
Technical specifications
Coding Easywave
Up to 32 transmitters can be programmed.
Frequency 868,30 MHz
Channels 1
Power supply 230 V AC, 50 Hz
Power consumption 1.2 W standby
1.2 W relay switched (without load)
Operating modes UP/DOWN (2-button operation, stop with reverse)
DEADMAN / slat adjustment (maximum 36 seconds)
Outputs 2 relay contacts (normally open)
Maximum contact load see table of loads
Operating temperature -20 °C to +60 °C
Dimensions 46 x 46 x 25 mm
Scope of delivery
  • Flush-mounted receiver
  • Operating manual
Models
Product numbers Description
RCJ01E5002-04-23K Flush-mounted receiver 1-channel, motor/2-button operation
Wiring diagram


Table of Loads
type of load max. load
resistive load cosφ = 1,0: 4,0 A / 920 VA
inductive laod cosφ = 0,8: 3,2 A / 736 VA