Homepage TÜV - Certificate
This version of the RCJ01 flush-mounted receiver is designed to switch low-voltage or mains voltage devices on and off via a potential-free contact when in the ON/OFF (1- or 2-button operation) or DEADMAN operating modes.

With its compact dimensions, the RCJ01 can fit into all standard flush-mounted boxes.

Up to 32 transmitters can be programmed into the receiver's memory, ensuring that complex control tasks can be solved easily without taking up unnecessary space.

The programming itself is very simple and is carried out by pressing a button directly on the device.


RCJ01E5001-02-23K
Technical specifications
Coding Easywave
Up to 32 transmitters can be programmed.
Frequency 868,30 MHz
Channels 1
Power supply 230 V AC, 50 Hz
Power consumption 1.2 W standby
1.2 W relay switched (without load)
Control ON/OFF (2-button operation)
ON/OFF (1-button operation)
DEADMAN (maximum 36s)
Output 1 potential-free relay contact (normally open)
Maximum contact load see table of loads
Operating temperature -20 °C to +60 °C
Dimensions 46 x 46 x 25 mm
Scope of delivery
  • Flush-mounted receiver
  • Operating manual
Models
Product numbers Description
RCJ01E5001-02-23K Flush-mounted receiver 1-channel, 230 V, potential-free contact
Wiring diagram




Table of loads
type of load max. load
resistive load: lamps, 230 V halogen lamps etc. 6,0 A / 1380 VA
inductive load: halogen lamps with wound transformers
(min. load of transformer 85%)
2,6 A / 600 VA
non- or serial-compensated fluorescent lamps with ferromagnetic ballasts 6,0 A / 1380 VA
parallel-compensated fluorescent lamps with ferromagnetic ballasts 2,6 A / 600 VA
capacity EVG: electronic cut-in units, electronic transformers etc. 4,0 A / 920 VA